Cross Point Drill Bit — 4-Piece Carbide Tip Drill Set (6mm, 8mm, 10mm, 12mm) with 6.5mm Hex Shank for Tile, Glass & Stone Drilling

1. Product Title

Cross Point Drill Bit — 4-Piece Carbide Tip Drill Set (6mm, 8mm, 10mm, 12mm) with 6.5mm Hex Shank for Tile, Glass & Stone Drilling

2. Product Specification

Our Cross Point Drill Bit features a triangular cross-point carbide tip and a yellow spiral flute body, delivering precise positioning and clean drilling on hard, slippery surfaces. This Cross Point Drill Bit series covers four opening diameters from 6mm to 12mm, and every bit comes with a 6.5mm hexagonal shank with a locking groove for quick chucking in common power drills. The complete parameter and factory specification table of the Cross Point Drill Bit is shown below:

Size Reference Table (as marked)

Note: All product data are manually measured with certain errors. Please refer to the actual product.

3. Craft & Performance

Every Cross Point Drill Bit is made with premium raw materials and mature carbide brazing craft, which is the core advantage of this Cross Point Drill Bit. The triangular cross-point tip of the Cross Point Drill Bit bites into smooth tile and glass surfaces immediately without skating or walking off the marked position, protecting the workpiece from scratches. The yellow spiral flute body of the Cross Point Drill Bit carries debris out of the hole quickly, keeping the drilling speed consistent and preventing clogging in deep holes. The 6.5mm hexagonal shank of the Cross Point Drill Bit locks firmly into power drill chucks and quick-change holders, allowing fast bit changes between the four sizes without slipping under load. From fine 6mm holes to large 12mm openings, the Cross Point Drill Bit set covers the most common daily drilling sizes with a stable, precise performance from the first hole to the last.

4. Wide Application

This multi-scene Cross Point Drill Bit handles precise drilling of hard and brittle materials, and the Cross Point Drill Bit is a necessary tool for tile installers, glass workers, renovation teams and DIY home users. First, the Cross Point Drill Bit works great on ceramic and porcelain tiles: the cross-point tip starts cleanly on the glazed surface, drilling holes for anchors, screws and pipe passages without cracking the tile. Second, the Cross Point Drill Bit performs excellently on glass and mirrors: the sharp tip centers accurately and cuts smoothly, making clean holes for fittings and shelves. Third, renovation workers often use the Cross Point Drill Bit for stone, masonry and concrete drilling where precise hole placement matters. Whether you are running a tiling business, a glass processing workshop or a home improvement project, one set of Cross Point Drill Bit can cover most daily drilling tasks, saving your tool procurement cost and switching time between different bits.

5. Product Advantages

• Practical 4-Size Kit: The Cross Point Drill Bit set covers 6mm, 8mm, 10mm and 12mm — the most commonly used opening sizes for tile and glass work in one purchase.
• Precise Cross-Point Start: The triangular carbide tip of the Cross Point Drill Bit bites into smooth tile and glass without skating, protecting the surface from scratches.
• Fast Hex Quick-Change Shank: The 6.5mm hex shank of the Cross Point Drill Bit locks firmly in power drill chucks and quick-change holders, with fast, tool-free bit changes.
• Efficient Spiral Flutes: The yellow spiral body of the Cross Point Drill Bit removes debris fast, keeping holes clean and drilling speeds consistent.
• Multi-Material Compatibility: One Cross Point Drill Bit set drills ceramic tile, glass, stone and masonry, reducing tool inventory for retailers and contractors.
• Safe & Stable Operation: The locking groove on the shank of the Cross Point Drill Bit prevents the bit from slipping out during high-torque drilling.
• Cost-Effective Wholesale Supply: Mass production of the Cross Point Drill Bit lowers manufacturing cost, offering competitive bulk prices for global hardware importers and cross-border sellers while maintaining stable top-tier quality.

6. FAQ

Q1: What materials can the Cross Point Drill Bit drill? A1: The Cross Point Drill Bit is designed for ceramic tile, porcelain, glass, stone and masonry drilling, with the cross-point carbide tip starting precisely on hard, glazed surfaces.

Q2: Which machine matches the Cross Point Drill Bit? A2: The Cross Point Drill Bit has a 6.5mm hexagonal shank with a locking groove, compatible with common power drills and quick-change holders with hex chucks.

Q3: What sizes are included in one set of the Cross Point Drill Bit? A3: One standard set includes 4 pieces in 6mm, 8mm, 10mm and 12mm opening diameters, with overall lengths from 101mm to 125mm.

Q4: Is OEM custom logo available for bulk orders of the Cross Point Drill Bit? A4: Sure, our Changshunda factory supports private logo printing, customized packaging design and mixed size combinations for large wholesale orders of the Cross Point Drill Bit.

7. SEO Keywords

cross point drill bit, spear point drill bit, carbide tip drill bit, tile drill bit, glass drill bit, 6-12mm drill bit set, 6.5mm hex shank drill bit, quick change drill bit, ceramic tile drilling bit, masonry drill bit, porcelain drill bit, stone drilling bit, Van Lonzo drill bit, wholesale drill bit set