100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade for Sintered Stone, 1.0mm Thin Cutting Disc for Angle Grinder

Product Specification

The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade is a professional thin‑body diamond cutting disc specially developed for sintered stone, porcelain and hard stone material processing. The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade adopts multi‑hole hollow design, which greatly optimizes air circulation during high‑speed cutting for rapid heat dissipation. The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade features 100mm outer diameter, 20mm mounting hole, ultra‑thin 1.0‑mm body thickness, bringing narrow kerf, clean cuts and minimal material loss. The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade is ideal for cutting and trimming sintered stone countertops, big porcelain tiles and engineered stone panels. With sharp vacuum‑brazed diamond grit, the 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade delivers smooth cuts and effectively reduces edge chipping. The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade fits most angle grinders with 20‑mm spindle hole, widely used in stone factories, cabinet workshops and on‑site renovation work.

3. Craft & Performance

The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade is produced with advanced vacuum brazing technology. Diamond abrasive particles form solid metallurgical bonding to the steel substrate, preventing grit falling off under continuous cutting loads. The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade is built with evenly distributed multiple round holes across the working surface. These ventilation holes enhance airflow, quickly take away cutting heat, avoid over‑heating burning of diamond layer and blade deformation during long‑time operation.

At only 1.0 mm ultra‑thin body, the 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade creates narrow cutting kerf, less cutting resistance and lower material waste. It greatly lowers the risk of chipping and cracking on expensive sintered stone and large porcelain slabs. High‑strength steel substrate keeps good flatness, ensures stable rotation and low vibration. The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade supports both dry and wet cutting modes. Wet cutting is strongly recommended to further suppress dust and extend service life. Every 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade undergoes strict dimensional inspection and balance check before leaving factory to guarantee stable and safe performance for stone workers.

4. Wide Application

The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade serves stone fabricators, cabinet installers, renovation contractors and DIY hobbyists for various hard‑material cutting jobs. ‑ Sintered Stone Processing: The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade is perfect for cutting, trimming and notching sintered stone countertop panels for kitchen and vanity projects. ‑ Large‑Format Porcelain & Ceramic Work: Cut big porcelain tiles, ceramic slabs for wall and floor renovation. ‑ Natural Stone Fabrication: Suitable for marble, granite and engineered stone cutting, edge trimming and slot‑making work. ‑ On‑Site Installation & Remodeling: Handy for site modification, opening cut‑outs for sinks and sockets on stone panels. ‑ Workshop Batch Production: Reliable performance for small‑to‑medium batch processing in stone‑processing workshops.

5. Product Advantages

1. Multi‑Hole Heat Dissipation Structure: The 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade uses dense distributed holes to accelerate heat dissipation, reduces thermal wear of diamond layer for longer service life.
2. 1.0mm Ultra‑Thin Disc Body: Thin‑kerf design reduces cutting resistance, minimizes chipping and cracking on costly sintered stone and porcelain slabs, less material waste.
3. Premium Vacuum‑Brazed Diamond Layer: Firmly bonded diamond grit offers fast cutting speed, smooth cutting surface, no frequent sharpening required.
4. High‑Strength Flat Steel Base: Anti‑deformation substrate keeps stable running, low wobble during high‑speed grinding and cutting.
5. Versatile Compatibility: Works great for sintered stone, porcelain, ceramic, marble, granite and engineered stone, meets diverse workshop and on‑site demands.
6. Ready‑to‑Use Specification: Standard 20mm arbor hole, directly mountable on matching angle grinders for cabinet and stone installation teams.

6. Changshunda Manufacturer Intro

Changshunda is a professional diamond abrasive‑tool manufacturer located in Shanxi, China. We focus on R&D, manufacturing and export of vacuum brazed diamond blades, grout removal discs, hole saws and other stone‑processing consumables. Our factory holds ISO9001 quality management certification, all products meet CE and EN13236 international safety standards. We implement full‑process quality control covering raw‑material screening, vacuum brazing production and finished‑product inspection. Apart from standard stock products, we provide OEM & ODM customized solutions for global wholesalers, distributors and independent‑store sellers. We continuously optimize sharpness, anti‑chipping performance and service life, delivering cost‑effective diamond cutting‑tool solutions for stone factories, cabinet shops and construction customers worldwide.

##7. SEO Keywords (Footer) 100mm vacuum brazed diamond multi‑hole saw blade, 1.0mm thin sintered stone cutting disc, multi‑hole diamond cutting wheel, porcelain slab cutting blade, angle grinder disc for sintered stone, engineered stone trim blade, anti‑chipping diamond disc, stone fabrication cutting tool

8.FAQ

Q1: Is the 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade suitable for cutting full sintered‑stone slabs? A: Yes, it is designed for sintered‑stone cutting and trimming. For thick slabs, please adopt multi‑pass shallow cutting instead of one‑time deep cutting to reduce stress and avoid cracking.

Q2: Dry cutting or wet cutting works better? A: Wet cutting is highly recommended for the 100mm Vacuum Brazed Diamond Multi‑Hole Saw Blade. It lowers dust, reduces heat accumulation and greatly prolongs blade life. If dry‑cutting is necessary, use intermittent cuts and do not apply heavy pressure.

Q3: Which angle grinder can this disc fit? A: Arbor hole is 20mm. Please confirm your grinder spindle size before installation. Do not exceed the maximum RPM marked on your power tool.

Q4: Can this blade cut glass? A: This blade is optimized for sintered stone, porcelain and natural stone. It is NOT recommended for glass cutting, glass may crack easily.

Q5: What safety tips should be followed? A: Secure the disc tightly before power‑on. Wear safety goggles, dust mask and protective gloves. Avoid side‑grinding operation, this disc is mainly for straight cutting.